|
 Contact Now
|
Roby Junior : Casemaker - UP ^
Casemaker Roby Junior - References from the World
Compact semi automatic turning-in and gluing machine with stock and board feeder capable of producing a wide varity of products, such as book cases, loose leaf, binders and much more.
By a production of 300 pieces/h Roby Junior perfectly satisfies the exigences of the small production: thanks to his flexibility can make a easy and rapid format change.
Case maker equipped with:
- Soft spine device
Technical data gluing unit
Gluing area: max. 52 x 80 cm (20.47 x 31.49 inches)
Paper feeder: max. 50 x 70 cm. (19.68 x 27.55 inches)
Type of glue: cold and hot
Glue feeding: non stop
Speed: 350 pieces/hour
Tank Capacity: 6 Kg (13 lb)
Motor power: Hp 0,25 = Kw 0,18
Techinacal data turning-in unit
Max size cardboard: 74 cm (29.13 inches)
Min size: 14 x 14 cm (5.51 x 5.51 inches)
Speed: 300 pieces/h. (according to the size)
Thickness of material: min 1,8 max 3 mm (min 0.07 max 0.19 inches)
Minimum turning-in open material: 18 mm (0.71 inches)
Motor: Hp, 0,25-Kw 0.3
Words related to the product:
backing units, cover machine, booklet, bookletmaking lines, bookletmaker book-mark back lining, binder spine inserts, sheet pasting machine, block making, book back gluing and back lining machines.
|
|
|
Contact Now
|
Roby Junior : Casemaker - version with board feeder unit - UP ^
Max size: 70 x 35 cm (27.56 x 13.78 inches)
Min size: 14 x 14 cm (5.51 x 5.51 inches)
Thickness of material : min 1,8 - max 3 mm (min 0.07 max 0.19 inches)
Max board pile height: 30 cm (11.81 inches)
Casemaker flash presentation
Words related to the product:
board feeder unit, back gluing-and-stripping machine, backing machine, rounding and backing machine, rounding and baching machine, rounding machine backing, rounding and backing, sheet pasting machine.
|
|
|
Contact Now
|
X Case : Casing-in machine - UP ^
Casing-in machine equipped with:
- Book block introduction on the blade
- Covers feeder
- Gluing station with cylinders with cold vynilic glue
- Easy operation
Technical Data
| Book block max. size |
500 x 460 mm |
| Book block min. size |
100 x 70 mm |
| Book block max. thickness |
80 mm |
| Book block min. thickness |
8 mm |
| Speed |
200 cycles/hour |
| Power required and voltage |
1,1 kw 380V-3ph-50Hz |
| Weight |
530 kg |
Words related to the product:
x-case, casing-in machine
|
|
|
Contact Now
|
ROBY 1800: Automatic Casemaker - UP ^
Roby 1800 is a fully automatic casemaker With "cover" we mean:
cover one single piece for the realization of files
covers three pieces for the production of hard cover books
covers more pieces, until to 5 pieces, for special productions, as samples
lining-in.
Roby 1800 can realize hard covers by using the following covering materials:
paper
plasticized paper
P.U. (on the basis of the type)
others materials of binding
Roby 1800 is composed by:
Covering material feeder
- Automatic high pile feeder of the material to glue, able to feed materials with the following sizes:
- Min. size cover: mm. 90 x 190
- Max size cover: mm. 480 x 830
- Min. thickness cover: gr 115
- Cover material picked up from the back
Glue unit
- Gluing material from the top
- Hot animal glue and/or cold (optional)
- Glue recycling pump
- Pre melter
- Easy cleaning at the end of the job
Aspirazione belt
The pushing on an inclined aspirant belt allows the picking up of no flat material and it assures a better register.
Card Board feeder
Min size: mm 90 x 180
Max size: mm 450 x 800
Min. thickness: mm 1
Max thickness: mm 5
Max no of pieces: 5 (standard)
Min size of the spine: mm 10
Flexible spine available as optional.
No stop high pile feeder.
Perfect coupling at register with optical reading of the final material part to be coupled.
Roller Press
Roller press to press the material by "soft" cylinders covered by teflon.
Wrapping machine
- Side wrapping by belts
- Frontal mechanical corners facility
Exit station
- High pile exit on a special device (capacity about 80 cm)
Power required: 5-6 KW
Dimensions: 8,2 x 2,1 x 1,2 m
Weight: kg 2800
Words related to the product:
cover machine, book binding machinery, case maker, print on demand, cover, cover board, sheet pasting machine, crapbook binder, self-cover, soft cover, front cover, half-linen cloth cover book, hard cover, hardcover book casemaking machines, book cover art.
|
|
|
Contact Now
|
SPECIAL : Book press - UP ^
Single Book Press
The Special 85 is a mechanically operated machine designed for pressing hard cover books after casing- in.
With its special design, once the air has been pressed out of the books, the "Special 85" maintains a constant pressure.
There are two control switches on the front side of the "Special 85" controlling the amount of pressure and up/down position of the table.
The two safety switches operate simultaneously avoiding any possible risks to the operator's hands.
Mounted on castor wheels.
Technical Data
Working surface area: 38 x 55 cm. (14 31/32" x 21 21/32")
Table width : 44 cm. (17 21/64")
Max. pressure: 600 kg. (1320 lbs.)
Engine : 1 hp=0,73 kw.
Supply Voltage 220-380V/50 Hz
Dimensions : 52 x 65 x 148 cm. ( 20 ½" x 25 19/32'' x 58 ¼ )
Net weight : 310 kg. (682 lbs.)
Words related to the product:
pressing, pressing machine, blocking press, heating and pressing machine, jointo pressing machine / forming machine / building-in machine, nipping machine, nipping press, book block nipping and smashing presses, nipping presses
|
|
|
Contact Now
|
Cimatic : Book Joint forming machine - UP ^
Cimatic is a semi-automatic pneumatic machine treadle operated designed to form the spine of the book in order to improve the case opening
Heating of the blades adjusted by a thermostat.
Equipped with a control by pedal in order to groove the back of the book and mounted on castor wheels.
The machine is equipped with two blades: one is fixed and the other is movable and are operated by a pneumatic cylinder, this last one is adjustable according to the book thickness.
The big simplicity to regulate according the thickness of the books avoid the long time of preparation.
Technical Data
Spine max height : 9 cm (3.54 inches)
Working width : 48 cm (18.89 inches)
Depth : 35 cm (13.78 inches)
Supply Voltage 220 V
Absorbed Power: 700W
Dimensions : 60x 65x150 cm (23.62 x 25.59 x 19.68 inches)
Netweight : 175 cm (385.80 lb)
Words related to the product:
back edge | joint | hinge, Book forming and pressing machines.
|
|
|
Contact Now
|
Beta : Book Cover rounding machine - UP ^
It perfectly rounds the book cover spine of any type of material
or thickness.
The width of the spine depends on the upper, adjustable blades.
The lower part consist of a drum including several rounding that can
be adapted to the book spine thickness.
This machine is treadle-operated, sturdily built and working by pedal.
Heating of the shape through an armoured resistance; the temperature
is regulated by a thermostat.
Mounted on castor wheels in order to facilitate the mobility.
Technical Data
Maximum height of book cover: 45 cm (17.71 inches)
Number of shapes:5
Max height of spine : from 0 to 65 mm (from 0 to 2.56 inches)
Heating : min 10°C. - max 100°C
Resistance: 500 W
Dimensions: 46 x 73 x 142h cm (18.11 x 28.74 x 55.90 inches)
Net weight: 88 kg (194 lb)
Words related to the product:
case, case maker, cover, cover board, crapbook binder, self-cover, soft cover, front cover, half-linen cloth cover book, hard cover, hardcover book casemaking machines, book cover art.
|
|
|
Contact Now
|
Saturno : Book - block rounding machine - UP ^
Book-back rounding machine, designed for the medium and large-sized industries.
No manual operation is required to prepare and adjust when changing over from one thickness to the other.
The machine is built by steel.
The up and down movement of the plate is adjustable through a lever switch.
Equipped with a transparent safety protection in order to assure a complete visibility during the rounding operation.
Mounted on castor wheels in order to facilitate the mobility
Technical Data
Width: 50 cm. (inches 19,68)
Max spine height 9 cm. (inches 3,54)
First engine: 0,75 hp=0,55 kw
Second engine : 0,25 hp=0,18 kw
Supply Voltage 220-380/50Hz
Dimensions: 67 x 50 x 115h cm. (inches 26,37 x 19,68 x 45,27)
Net weight 265 kg (lb 584)
Words related to the product:
back rounding, back rounding machine, rounded back, book back rouding machine.
|
|
|
Contact Now
|
RECORD: Gluing machine - UP ^
The Record N gluing machine has been designed for hot and cold gluing of flexible materials, such as paper, thin cardboard, plastics, leather.
The gluing device is realized by stainless steel and it can be adjusted in its height.
The glue thickness is adjustable.
Glue heating is controlled by a thermostat.
The machine is mounted on wheels in order to facilitate the mobility.
Optional
Special device to glue hard materials.
Technical data
Formats availables: 54 cm and 74 cm. On demande:114 cm.
Size 54 cm
Mechanical speed :20 m/min
Motor power:HP 0,25=Kw 0,18
Motor voltage:220/380V/50Hz
Resistance: 220V/1.700W
Tank capacity: 7 kg
Dimensions:76 x 76x 98h cm
Net weight: 116 kg
Size 74 cm
Mechanical speed :20 m/min
Motor power:0,25 hp=0,18 kw
Motor voltage:220/380V/50Hz
Resistance: 220V/1.700W
Tank capacity: 9 kg
Dimensions: 96 x 76 x 98h cm
Weight: 135 kg
Words related to the product:
side gluing/edge gluing, pasting machine, sheet gluing machines, box glueing machine, gluing machine, gluing device, gumming apparatus and machines, gumming machine, edge binding, edge glueing machines, sheet pasting machine, bonding/glueing machines.
|
|
|
Contact Now
|
RIMBO: Turning-in machine - UP ^
Semi-automatic pneumatic machine, treadle operated, for the turning in of book-covers or folders, suitable for any kind of covers.
The machine has been designed with two pressure clamps in order to make the turning-in easier and to save work time.
Adjustable pressure of the clamps.
It doesn' t need regulations for the format or material thickness change.
Equipped with built-in compressor located inside the machine.
The machine is mounted on wheels for easy deplacement.
It' s available in the sizes 80 cm. and 110 cm.
Technical Data
Size 80 cm
Compressor: HP 1,25=Kw 0,92
Dimensions: 95 x 45 x 96h cm
Net weight: 165 kg
Size 110 cm
Compressor: HP 1,25=Kw 0,92
Dimensions: 125 x 45 x 96h cm
Net weight: 195 kg
Words related to the product:
Turning-in machine
|
|
|
Contact Now
|
VIP BANDING : Head banding machine - UP ^
Machine to glue head bands on the book spine.
The machine is equipped with:
- Feeding station / connection according to the chosen configuration
- Glue tank available, according to the enquiry, with
- hot melt glue
- PUR
- Head-bands supporting and feeding station
- Paper and head-bands mounting station, with cold glue; cutting station according to the spine thickness and gluing on the book block
- Roll support with side cutting blades in order to adapt the roll width to the spine lenght (optional)
- Exit station
Technical Data
Book block max. size: 500 x 325 mm
Book block min. size: 120 x 70 mm
Book block max. thickness: 60 mm
Book block min. thickness: 8 mm
Roll max. diameter: 250 mm
Speed: 20 cycles/min
Power required and voltage: 3 kw 380-3ph-50Hz
Weight: 1200 kg
Air compressor - Required and supplied by the end-user
Words related to the product:
backlining and headbanding machine, banding machines, headbanding and backlining machines, book binding machinery, (bookbinding - print finishing, print on demand)
|
|
|
Contact Now
|
VIP PRESS ENDPAPER: Spine pressing and endpaper gluing machine - UP ^
Vip Press & end paper allows to glue endpapers directly on the book block, and not on the sheet signature, in order to avoid several setting up and collecting operations in the sewing machine.
The machine is equipped with:
- Feeding belt / connection for the automatic feeding of the book block
- Spine pressing station
- Cold gluing of a 4 mm thickness stripe
- Automatic no-stop feeder of endpapers
- Book-endpaper mounting system
- Book-endpaper pressing system
Technical Data
Book block max. size: 500 x 325 mm
Book block min. size: 120 x 70 mm
Book block max. thickness: 60 mm
Book block min. thickness: 8 mm
Speed: 20 colpi/min
Power require and voltage: 3 kw 380-3ph-50Hz
Weight: 1500 kg
Air compressor - Required and supplied by the end-user
Words related to the product:
endpapering machines insert, insert, supplement, endpapering machines self-endpapers/self-ends, book smashing and compressing machine inside lining machines, edge glueing machines, supplement inserting machines inserting systems
|
|
|
Contact Now
|
VIP F80: Book thread sewing machine - UP ^
Designed on the base of the famous BREMHER, thanks to the optimal quality / price ratio the F80 is certainly the best semiautomatic sewing machine for the graphic arts companies who want to be self-sufficient in the production of sewn books.
The F80, very compact and reliable, is able to satisfie all the productive needs combining simplicity of use and economy of investment.
Technical Data
Dimension max. signature: 290 X 390 mm
Dimension min. signature: 80 x 150 mm
Mechanical speed max.: 145 cycles/min
Number of points: 8
Length of points: 24 – 32 mm
Power installed: 3 Kw
Poids machine: 2100 kg
Dimensions machine: 2670 x 1700 mm
Words related to the product:
book sewing machine, production of sewn books, semi automatic sewing machine
|
|
|
Contact Now
|
VIP FORMING: Pressing and book joint forming machine - UP ^
Pressing and book joint forming machine equipped with:
- Book block feeding station
- First pressing and book joint forming station with heated blades
- Second pressing and book joint forming station with heated blades
- Automatic book exit
- Oleodinamic book pressing system
- Pneumatic book joint forming system
- Two separated temperature control stations
- Two separated pressing timers
Technical Data
Book block max. size: 500 x 325 mm
Book block min. size: 120 x 70 mm
Book block max. thickness: 60 mm
Book block min. thickness: 8 mm
Speed: 20 cycles/min
Power required and voltage: 3 kw 380-3ph-50Hz
Weight: 1600 kg
Dimensions (without belts): 2100 x 1000 x 1550 mm
Air compressor - Required and supplied by the end-user
Words related to the product:
Pressing and book joint forming machine
|
|
|
Contact Now
|
VIP GAZE: Back lining machine - UP ^
Vip Gauze allows to glue the gauze (or other suitable materials) directly on the book spine.
The machine is equipped with:
- Feeding station / connection according to the chosen configuration
- Gluing system available, according to the enquiry, with
- Hot melt glue
- PUR
- Gauze cutting station from roll and gluing on the book spine
- Roll support with side cutting blades (optional) in order to adapt the roll lenght to the spine lenght
Technical Data
Max. book block size: 500 x 325 mm
Min. book block size: 120 x 70 mm
Max. book block thickness: 60 mm
Min. book block thickness: 8 mm
Max. roll diameter speed: 20 cycles/min
Power requires and voltage: 3 kw 380-3ph-50Hz
Weight: 1400 kg
Air compressor - Required and supplied by the end-user
Words related to the product:
book back gluing and back lining machines, back lining machine
|
|
|
Contact Now
|
VIP RIBBON: Ribbon inserting machine - UP ^
Machine to insert the ribbon: (max. 2, at the same page, in standard version) equipped with:
- Book block feeding station
- Book block opening stations
- Ribbons feeding and cutting station
- Exit station
Technical Data
Book block max. size: 500 x 325 mm
Book block min. size: 120 x 70 mm
Book block max. thickness: 60 mm
Book block min. thickness: 8 mm
Speed: 20-40 cycles/min. according to the size
Power required and voltage: 2 kw 380-3ph-50Hz
Weight: 900 kg
Air compressor - Required and supplied by the end-user
Words related to the product:
bookmark inserting machines, ribbon, ribbon fold, longitudinal fold
|
|
|
| |
|
All data are indicative, the company reserves the right to change the content at any time.
All rights reserved. |
|
